Swan Extruding Power Cable Jacket Extruder Extruding Machine 90 Power Cable Sheath Extrusion Line

Basic Info

Product Description

Product Description

This 90*25 extruding machine is mainly applied for extrusion of PVC, PE and other thermoplastics insulation and jacket for wire and cable core by hot extrusion method. Our extruder is driven by Siemens AC frequency-conversion motor and controlled by ABB frequency-conversion speed control device, and RKC microcomputer touch type temperature controller (set by PID) with the accuracy of ±2ºC. The body of extruder adopts electrical heating and wind cooling by solid state relays, Max heating temperature of extruder barrel is 300ºC. The screw is BM type in order to adapt the internal material processing. The material for screw and barrel is 38CrMoALA with nitridation treatment which is corrosion-resistant and wear-resistant. The surface hardness is ≥HV850 and the nitridation depth is 0.5-0.7mm. The hard tooth face reducer is used for gearbox. The body of gearbox is made of Ductile Iron and Material for gear is 20CrMnTi with nitridation treatment. Transmission shaft uses 40Cr material; the head adopts new three-plate type half clamping which is convenient and reliable.

Main parameters

Product details

Extruding machine host

Injector

Loading and drying

Trough

Cabiner

Diameter tester

Spark tester

Equipment composition:
LM2200 partal type pay-off machine one set5 Groups wheel type tensioner one setSW-SJ90*25 extruder one setCrosshead for jacketing one setVacuum loading and drying device one setStainless steel cooling trough(Sectional type trough) one setDrying device one setSpark tester one setCrawler type meter counter one setExternal diameter gauge one setTQDV800 belt type caterpilar one setLM2200 portal type take up and traverse one set Electric control system one set

Equipment Atlas

Features

- Broad range wire and cable making
- Components equipped with maximum flexibility
- Friendly production line for operator
- High output capacity
- Non stop production line
- Simultaneous insulation of different color materials
- Adopt motors, screws, PLC, etc. of international or domestic well-known brands

How to get a quote

For extruders , pls inform :

1, Max. section

2, Conductor structure ( single or multi-core , pls inform wire number and single wire size )

3, What is the payoff bobbin size

4, What is take up bobbin size ( or you need auto coiling with film wrapping ) ;

5, If you need the online testing units ( Diameter ; pre-heating unit ; sparkle test) ;

6, If you need the printer ( ink or laser jet printer ) ;

7, For extruding capacity ( kgs/hour) , speed ( meters/minute ), what's requirement ?

8, Pls inform me your budget , we can recommend accordingly .

With above specific information ,we can provide quotation accordingly .Thanks .